A quick reference video that shows the main points of how I restring my guitars - decades of experience have made me optimize this process. You may do it differently, and that's okay too.
Tools you should have:
- Wire cutters
- String Winder
- Guitar Tuner
Join Team FranLab!!!! Become a patron and help support my YouTube Channel on Patreon: http://www.patreon.com/frantone
#music #guitar #tips
- Music by Fran Blanche -
Fran on Twitter - https://twitter.com/contourcorsets
Fran's Science Blog - http://www.frantone.com/designwritings/design_writings.html
FranArt Website - http://www.contourcorsets.com

By Fran

14 thoughts on “Guitar restringing the easy way”
  1. Avataaar/Circle Created with python_avatars jgonzalez55 says:

    Sorry I fell asleep……………oh ya…. you did the minimal to keep pats' engaged and contributing.

  2. Avataaar/Circle Created with python_avatars Bearded engineer’s show says:

    Nice tips! Thank you! Gone restringing the hard way)

  3. Avataaar/Circle Created with python_avatars Mitrick Johns says:

    I'm embarrassed to say that after 50 years of guitar playing, this is the first time I saw a string winder in action.

  4. Avataaar/Circle Created with python_avatars Angry Dove says:

    A contentious issue, some people will lose their minds to see you remove all the strings at once, I always thought that was forbidden and bad for the neck.

  5. Avataaar/Circle Created with python_avatars Robee Shepherd says:

    This is so useful, thank you Fran!!! I didn't know about the harmonic thingy

  6. Avataaar/Circle Created with python_avatars Hola! David Perkins says:

    That guitar looks tiny! (31 inches?) It looks the size of a ukulele.

  7. Avataaar/Circle Created with python_avatars Kurt Elliott says:

    If you never seen Fran's Polk Salad Annie check it out!!!

  8. Avataaar/Circle Created with python_avatars Hola! Dreamer says:

    Hi Fran , nice ax !! Good tutorial , however I would never – ever use a string winder on my Strat . I have ' lockers ' so it makes it a little easier .
    Later 😃 Dreamer 

  9. Avataaar/Circle Created with python_avatars Jason Riffle says:

    Thanks for the procedure, and tips!

  10. Avataaar/Circle Created with python_avatars Axy-dent-ly dreaming says:

    Hey Fran!
    I also put as many winds on each post till the string gets way past the waist. So due the tension the winds want to move upwards and will get pressed tighter together, increasing the friction for better stability. With 09-42 I end up with 2,4 winds on low E / 3,5 on A / 4,5 on D / 5,5 on G / 6 on B and 7-8 on high e.

  11. Avataaar/Circle Created with python_avatars Axy-dent-ly dreaming says:

    Hey Fran!
    I also put as many winds on each post till the string gets way past the waist. So due the tension the winds want to move upwards and will get pressed tighter together, increasing the friction for better stability. With 09-42 I end up with 2,4 winds on low E / 3,5 on A / 4,5 on D / 5,5 on G / 6 on B and 7-8 on high e.

  12. Avataaar/Circle Created with python_avatars Nuts n Proud says:

    Thanks Fran. I use the strings in the green packet. Thanks for the advice. I will try and copy the way you tune up. (Novice guitar player).

  13. Avataaar/Circle Created with python_avatars good 'un says:

    I assume that's a child's guitar or a travel guitar because it doesn't look much bigger than a vintage Vox Mando-guitar which would have 12 strings in that same general physical real estate!

  14. Avataaar/Circle Created with python_avatars good 'un says:

    Keep a pair of crappy wire cutters around just for cutting the strings when you change them, because oftentimes they will develop notches in the blade from the hardened strings and will not work well for stripping wire when you're fixing your amplifier or making patch cables.

Leave a Reply to Mitrick Johns Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.